下載app免費領取會員
設計單位? 非常建筑
施工圖設計? 中國建筑標準設計研究院
項目地點? 河南省鄭州市
竣工時間? 2019年
建筑面積? 39172.10平方米
本文文字由非常建筑提供。
類型學分析
Typological analysis
無明確使用方的辦公樓設計通常被安全、日照等常規因素所左右。在分析了很多辦公樓案例之后,我們決定在這個位于鄭東新區的高層建筑中采用典型的直線形平面加核心筒結構,同時積極尋找改進的機會。
The design of speculative office towers is usually dictated by sets of conventions such as safety concerns and natural light. The project, a high-rise speculative office tower, is located at the Zhengdong New District in the city of Zhengzhou. After studying various precedents, we decided to accept the prototypical, rectilinear plan with centralized cores as a starting point while looking actively for improvements during the design process.
基地形狀
Site geometry
場地的條件恰好提供了改進上述原型的機會:環繞人工湖的一組建筑形成了一個巨大的圓環,作為圓環一部分的場地為帶有少許弧度的矩形。我們認為盡管這個弧度很含蓄,也應該將其體現出來。于是,我們把典型的矩形平面變成了“之”字形,從而為原本呈方形的建筑體量增加了一種垂直性。
An opportunity for improvement was presented by the site itself—a slightly curved rectilinear parcel that is a part of a monumental ring around an artificial lake. We believe the curvature, however subtle, should be acknowledged and so transformed the rectangular plan into a zigzagged configuration. Such move also added a sense of verticality to an otherwise blocky volume.
平面和空間
Floor plan and space
“之”字形的折線形成鋸齒形平面,提供了更多的陽角空間和更好的視野,使開放空間感覺起來更像一組小尺度空間的組合。
The zigzag configuration offers a floor plan with multiple corners for better views and a sense of spatial aggregation brought by the smaller increments.
在剖面上,我們在兩個核心筒之間設置了一個中庭,兩組廊橋穿越其中。這樣的設計讓人們在建筑內部也可以感受到建筑的垂直性以及空間的戲劇性。
In sectional design, we devised between the cores an atrium that penetrates all floors and spanned by footbridges so the building’s dramatic verticality can be experienced from within.
結構和經濟
Structure and economy
我們采用了核心筒+外圍密柱的無梁鋼筋混凝土結構,使得內部空間完全開放、靈活,可以根據需要分隔成不同大小的辦公室。無梁結構使我們得以在降低層高的同時保持空間凈高,在建筑總高度不變的情況下多做出一層使用空間。
The beam-free, reinforced-concrete structural system with central cores and peripheral columns creates a total open space flexible for further division. Without beams, we were able to reduce the floor height— but not the ceiling height— to include an extra floor within the building height limit.
立面設計
Facade design
外圍的密柱為承重與自然通風的功能相間布置,密柱被設在圍護界面之外,進一步加強了建筑的垂直感。我們將高樓層的柱子扭轉一定的角度,到低樓層則每兩根合為一根,從而保證低樓層的室內外空間有充分互動。
Peripheral columns for load bearing and natural ventilation are placed in alternation outside the building enclosure, reinforcing the vertical composition of the volumes. Neighboring columns twist and converge with the descending height for better indoor-outdoor interaction on the lower floors.
設計圖紙? ▽
完整項目信息
項目業主:中交(鄭州)投資發展有限公司
項目地點:中國河南省鄭州市鄭東新區
主持設計:張永和
項目團隊:楊普、吳瑕、馮紓苨、梁小寧、饒崗、王玥、程藝石、張博文
施工圖設計:中國建筑標準設計研究院
幕墻咨詢:北京咨周建筑幕墻設計咨詢有限公司
燈光顧問:棟梁國際照明設計(北京)中心有限公司
建筑面積:39172.10平方米
建筑結構:筒中筒無梁樓蓋結構
設計周期:2012年—2016年
竣工時間:2019年
版權聲明:本文由非常建筑授權發布。歡迎轉發,禁止以有方編輯版本轉載。
投稿郵箱:[email protected]
本文版權歸腿腿教學網及原創作者所有,未經授權,謝絕轉載。
下一篇:BIM建筑|同濟院新作:西藏美術館,世界屋脊上的時空疊變
推薦專題